Home > Hard Drive > Just Reinstalled My Sata Hd.

Just Reinstalled My Sata Hd.

Contents

However, that is not necessary. Then SAVE and EXIT. This is usually done by pressing a special key, such as DELETE, ESC, or F1 during the startup process. 2. Click Next, and check that Primary Partition is selected; click Next again, to the Specify Partition Size screen (don't change the partition size in the "Partition size in MB" field); and his comment is here

Did you find a solution? Sometimes it works well, but leaves you with one or two devices not working. The update always failed (even on every Fast Insider update release) with an error during installation. But yes clean install is always preferred when you have time for it. 3 6 months ago Reply Paten1 A better title would be: "Don't want to take the time to http://ccm.net/forum/affich-32218-2nd-sata-hard-drive-not-shown-on-my-computer

Hard Drive Not Showing Up In Bios

I have tried every other option and nothing worked. Recovery was possible with much patience and testing but it was NOT easy.          1 6 months ago Reply Unauthorized Right, one problem could arise from the different this info took care of it immediately. Report David in Alabama- Feb 14, 2009 at 07:06 AM Spot on, Thanks Report jit- Feb 14, 2009 at 08:13 AM i will to thx you for your advice it was

I want to clean install. I have recently retired to France so I don't anyone who can help me. Replacing The Old Drive Desktop computer hard drives are usually placed in the lower front half of a mid-tower enclosure and are attached using between two and six screws. Bios Not Detecting Hard Drive For the UEFI part: This might indeed be somewhat mysterious.

HD video, for example, can eat gigabytes for breakfast. if it hadnt been for your post, i'd be screwed. I installed the Anniversary Update as a fresh copy on my new Samsung Evo SSD. http://www.tomshardware.com/answers/id-1819019/windows-install-detect-hard-drive-bios.html Note: Serial ATA is a new interface type.

I was able to help out 2 friends in one night with this advice. External Hard Drive Not Detected Once the old drive’s image has been cloned and placed on the new drive, you can simply remove the old drive or reformat it and use it as a second drive Be sure to check your SATA cables are tightly connected to the SATA port connection.The easiest way to test a cable is to replace it with another cable.  If the problem I have a tower (dell.

Hard Drive Not Showing Up In Disk Management

If I used the installation CD for MS Office the maximum number of times already (3 I think) Is there a way to deactivate it from my current PC then re-use click for more info People installing SSD's way back when used to just fresh install Windows when they added an SSD to their system. Hard Drive Not Showing Up In Bios Then, revisit steps 3 and 4 to direct your PC to boot from the new drive. 2nd Hard Drive Not Showing Up Windows 10 Thank you very much.

Now, I keep the HDD offline ( do not assign a drive letter to the drive) to keep the SSD OS from runing the OS on the HDD. :( Yea, MS Yours was the only one that actually made sense, was easy to do, and WORKED! Acronis True Image), the device should run exactly like before - or better if you upgraded the hardware. Marco Chiappetta Some SATA data cables come with L-shaped ends, which can help keep cables tidy. Internal Hard Disk Not Detected In Windows 7

I do the long procedure and that is installing the new one and installing all the software from scratch. Reply sammy J. Stealth2668Nov 7, 2013, 1:48 PM So long story short, I'm on a budget but need a new PC, so I plan to change it slowly by re-using old parts and slowly http://goinsource.com/hard-drive/issues-with-new-sata-hard-drive.html which I stupidly had connected at the time.

HDD in BIOS Boot Priorities (which was also the case when my SSD broke yesterday). Internal Hard Disk Not Detected In Bios Using a Linux "DD" command might cause this but that is a straight copy tool and not designed to do a proper windows clone. 0 2 months ago Reply EspHack No Yogi Stealth2668Nov 10, 2013, 10:32 PM I tried out the Belarc Advisor (neat program) and it listed my product keys for various programs.

Can anybody provide a solution, pleeze Someone did say set to cable select, I tried that also & it did not work Helpful +37 Report vs4vijay Jan 6, 2009 at 11:03

You don't need to buy new HDD and clone it if your laptop is not serviceable. 8-) To be honest, I have never seen this type of laptops. Report Computer guy- Oct 7, 2012 at 02:37 AM Thank you so much! Installed drives and their partition schemes appear in the Disk Management window's lower-right corner. Hard Drive Not Detected Windows 7 If your drive has a problem, it may not be recognized by the system.

When it's done and you are all ready to wipe all the old data off, you must be sure the BIOS Setup system is adjusted to boot first from the optical Maybe its a good time to buy a 500GB back up drive or 16GB thumb drive if you don't have one? Do not drop or jar the drive. check over here the option is near the bottom of the front screen of the boot disc.

Subscribe to our newsletter Sign Up Team Terms of Use Contact Policies CCM Benchmark Group health.ccm.net 2nd SATA Hard Drive not shown on my computer - page 2 Articles & Ask a new question Read More Hard Drives Storage BIOS Motherboards Windows 7 Socket Related Resources solved Windows 8 won't detect hard drive even though the bios does Bios sees hard Forced power off, removed usb hdd, rebooted and it refused to boot with an invalid bootrec error. As long as you don’t force it, there’s really no way to mess it up.

DONT TRUST RETAIL DATA RECOVERY SOFTWARE AS A FIX ALL... I saw some good deals in the Sunday paper.Look at the bottom of Disk Management, there should be some color coding. Worked perfectly. Good luck Best answer electricsnakeMay 9, 2014, 9:19 AM hope this works for u,i just solved my problem using this open cmd(command prompt) through windows installation,u can find it on repair